Custom M4 AEG - $150
4 posters
Page 1 of 1
Custom M4 AEG - $150
This custom M4 AEG is about as maxed out as you can get. Between the custom machining and internal upgrades it will easily make up for itself in the parts alone.
I am selling it AS-IS since I have not shot it in months (almost years) and the last thing I did to it was replace the bucking before a game in Ocala but never used it. I am not sure what it is shooting but if I recall it was around 290 since it was designed to be a CQB weapon.
It has been modified with a custom stock assembly. Essentially the lower receiver and the buffer tube are now one piece with a custom plate adapter between them using machine screws to hold the assembly in place. This allows the wiring to run through the rear stock and to hold a stick AK style battery in the stock without needing a Crane stock system.
External Parts List:
TM Buffer Tube / Stock
G&P Metal Body
TM Grip
G&P Take down / Pivot Pins
G&P Forward Assist
TM Charging handle
TM Bolt Release
Real steel Free Floated Aluminum Forend
Custom machined outer barrel (no wobble at all)
JDT Gas Block / Front sight
Chinese AK-74 muzzle brake
Internal Parts List:
System High Torque Motor
16 GA Silicon sheathed multi strand wiring
Tamiya Large Connector
G&P Reinforced Gearbox
System Standard Gears
Systema Upper Tune Up Kit (M16A2 version)
Polycarb Piston
Guarder Nozzle
TM Selector Plate
G&P Metal Hop-up assembly
Madbull Bucking
TM Inner Barrel (If you want a custom cut length I can include one a bit longer to go under a suppressor for a bit more $$)
If you want the EOTech clone as well then I will add it to the package for $15. Alone it would be $25.
Also included is a Warhead 9mm Uzi magwell conversion kit. The machining of the forend, gas block slots, and 9mm conversion can be seen here:
[You must be registered and logged in to see this link.]
I am not interested in trades at this time for airsoft. You might entice me with other gear or items however.
[You must be registered and logged in to see this image.]
I am selling it AS-IS since I have not shot it in months (almost years) and the last thing I did to it was replace the bucking before a game in Ocala but never used it. I am not sure what it is shooting but if I recall it was around 290 since it was designed to be a CQB weapon.
It has been modified with a custom stock assembly. Essentially the lower receiver and the buffer tube are now one piece with a custom plate adapter between them using machine screws to hold the assembly in place. This allows the wiring to run through the rear stock and to hold a stick AK style battery in the stock without needing a Crane stock system.
External Parts List:
TM Buffer Tube / Stock
G&P Metal Body
TM Grip
G&P Take down / Pivot Pins
G&P Forward Assist
TM Charging handle
TM Bolt Release
Real steel Free Floated Aluminum Forend
Custom machined outer barrel (no wobble at all)
JDT Gas Block / Front sight
Chinese AK-74 muzzle brake
Internal Parts List:
System High Torque Motor
16 GA Silicon sheathed multi strand wiring
Tamiya Large Connector
G&P Reinforced Gearbox
System Standard Gears
Systema Upper Tune Up Kit (M16A2 version)
Polycarb Piston
Guarder Nozzle
TM Selector Plate
G&P Metal Hop-up assembly
Madbull Bucking
TM Inner Barrel (If you want a custom cut length I can include one a bit longer to go under a suppressor for a bit more $$)
If you want the EOTech clone as well then I will add it to the package for $15. Alone it would be $25.
Also included is a Warhead 9mm Uzi magwell conversion kit. The machining of the forend, gas block slots, and 9mm conversion can be seen here:
[You must be registered and logged in to see this link.]
I am not interested in trades at this time for airsoft. You might entice me with other gear or items however.
[You must be registered and logged in to see this image.]
Re: Custom M4 AEG - $150
I have already been flooded with requests on the EOTech so I am going to add some info about it.
Here are some pics of the reticle in full daylight and indoors to show what ghosting is on it. For now I will be nice and offer the EOTech FREE!!! with the purchase of the AEG. After a week I will allow the EOTech to go separately. Until then it will stay firmly attached to the top rail of the M4.
[You must be registered and logged in to see this image.]
Here are some pics of the reticle in full daylight and indoors to show what ghosting is on it. For now I will be nice and offer the EOTech FREE!!! with the purchase of the AEG. After a week I will allow the EOTech to go separately. Until then it will stay firmly attached to the top rail of the M4.
[You must be registered and logged in to see this image.]
Re: Custom M4 AEG - $150
The sight has been sold. Replica is still for sale. Verified working condition at a game this afternoon, functioned flawlessly all game.
Re: Custom M4 AEG - $150
If this is still here when I get the money, i'll definately pick it up. I'm trying to get a new primary and i'm pretty close to getting to 150.
Similar topics
» Custom M4 AEG - $250
» WE Custom DMR & WE SCAR-L For Sale
» G&G M-4 custom for sale
» Custom WE CQB master
» Custom tri shot
» WE Custom DMR & WE SCAR-L For Sale
» G&G M-4 custom for sale
» Custom WE CQB master
» Custom tri shot
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum